Oursson JM8002, Инструкция по эксплуатации

Страница: 19 / 32

OPERATION
1. To assemble-disassemble the device:
Assembly order
For juice: install the juice bowl on motor
base. Slowly rotate the bowl clockwise
until it stops. After that, install the rotating
brush, the three-tier mesh filter and the
pressure screw. Close the bowl with cover
by turning it clockwise until it stops.
For puree: install the puree bowl on motor
base. Slowly rotate the bowl clockwise
until it stops. After that, install the pressure
screw. Close the bowl with cover by
turning it clockwise until it stops.
Disassembly order
First, remove the bowl cover by turning
it counterclockwise. After that, remove the
remaining parts of device in reverse order
of assembling it. Rinse all the removable
parts under running water with a cleaning
brush, dry them thoroughly and store
in a clean, dry place.
2. How to place products:
If needed, the products have to be
pretreated, washed, peeled or cut into
pieces. Add the products slowly as the
speed operation is low (the pressure
screw makes only 47 rotations per
minute, considering that the products
are cut into small enough pieces).
When juicing finishes, you can switch
the device on REV (reverse) mode for
2-5 seconds for easier disassembly.
3. If the device is overloaded or the products
are too hard or sticky, the screw can stop.
If pressure screw abruptly stops rotating,
first turn off the device. Then use the
reverse function REV for 3-5 seconds.
Then turn on the device. This procedure
can be repeated several times.
4. If you cannot open the cover, switch
the device on REV (reverse) mode for
2-5 seconds. This will make fruit and
vegetables, which are stuck in the device
and block the cover, move in the opposite
direction. Turn off the device and remove
the cover, slowly rotating it.
5. Pretreating products:
Hard products, such as carrots, radish
and other root vegetables should be cut
into 2cm pieces.
Sticky and fibrous products (greens).
If stems are thick, cut them and separate
from leaves.
REMINDER FOR USER
17