Oursson JM8002, Инструкция по эксплуатации

Страница: 12 / 32

OPERATION
1.
Install the juice bowl on motor base.
Slowly rotate the bowl clockwise until
it stops (Fig.1).
2.
Install the three-tier mesh filter in the
rotating brush before installing it in the juice
bowl. Install the three-tier mesh filter with a
rotating brush so that the mark on the mesh
filter coincides with the mark on the bowl as
shown in Fig. 2.
3.
Insert the pressure screw in the center
of three-tier mesh filter as shown in Fig.3.
4.
Install the cover. Place the juice bowl cover
on the juice bowl so that the mark on the
bowl coincides with the mark on the cover.
Then, slowly turn the bowl cover clockwise
until the mark on the cover coincides
with the mark on the handle, as shown
in Fig. 4, Fig. 5.
ASSEMBLY INSTRUCTIONS (FOR JUICE)
1 3
2 4
Juice bowl
Protection
mechanism
Pressure
screw
Motor base
Motor base
Marks on the
mesh filter
Marks on the
juice bowl
Marks on the
bowl cover
Marks on the
bowl handle
Rotating brush
Mesh filter
Juice bowl cover
Motor base
Mesh filter
10