4
1.2 Text message (SMS) settings
Use of text messaging requires that the Ouflex is connected to a
GSM modem (GSMMOD6, additional equipment).
System settings > SMS settings
1 System settings
System settings include setting the time, date and language, as well
as text message (SMS) settings, network settings, display settings and
device type information.
Main menu
System settings
Alarms
Point info
>
>
>
Time 17:01
Date 22.01.2017
Language English
SMS settings
Network settings
Display settings
Type info
Lock code Not in use
Backups >
>
>
>
>
>
>
>
>
Date
22.01.2017
dd.mm.yyyy
Enter the day:
Time
19:44
hh:mm
Enter the hours
1.1 Setting date, time and language
It is important that time and date are correct. Alarm information, for
instance, shows when an alarm has activated and inactivated.
It is
highly recommendable to ensure that time and date are correct when
you are making time programs with the weekly program or special
calendar. The device
clock takes daylight savings and leap years into
account automatically. The clock has a backup for power outages
lasting at least three days.
Hours and minutes can be set separately.
1. Set hours and press OK to accept.
2. Set minutes and press OK to accept.
3. Press Esc to cancel and exit if needed.
1. Set day and press OK to accept (name of weekday is updated au-
tomatically).
2. Set month and press OK to accept.
3. Set year and press OK to accept.
4. Press Esc to exit.
You can change the HMI language here if device has more than one
language.
System settings > Time
System settings > Date
System settings > Language
Language
Suomi
English
Svenska
System settings
Take the GSM modem into use:
1. Enter your PIN. Wait as long as the notice: ”Modem ok” appear in
the display.
2. Switch the controller power off.
3. Connect the modem.
4. Switch the power on and the controller initializes the modem and
detects the message center (the message center number is not
visible on the display).
5. Check the signal strength and status of modem from Ouflex
display
6. Enter Device ID, if you want.
7. Test the sms communication. Send to Ouflex a message: Key
words. If the controller sends a message where is a list of key
words, text message communication is ok. If the controller doesn’t
send a text message, enter the message center number, make po-
wer cut and turn it back. Retest the text message communication.
