OUMAN EH-800, Руководство пользователя

Страница: 20 / 60

20
Time
19:44
tt:mm
Give the hours;
Time and date
First set the day and press OK to confirm.
Next set the month and press OK to confirm.
Then set the year and press OK to confirm.
The day of the week will automatically be updated on the display.
Press ESC to exit from the time setting mode.
Setting the date
The hours and minutes can be set separately
Set the hours and press OK to confirm.
Set the minutes and press OK to confirm.
It is important that the time and date are correct, because, e.g.,
in alarms you can see when the alarm has become activated and
when it has become inactive.
The controller’s clock automatically makes summer time and stan-
dard time changes and registers leap years. The clock has a backup
system in case of short power failures.
Clock functions -> Time and date
If there are a number of unacknowledged alarms in the controller,
acknowledge the alarm appearing on the display and the previous
alarm will appear. When all possible active alarms have been ack-
nowledged, the alarm window will disappear from the display and
the alarm will no longer sound.
Alarm notice
The controller can give an alarm for many reasons. In the event of
an alarm, an alarm window pops up which displays exact alarm in-
formation.
Danger of freezing alarm
Supply water temperature 10.2 °C
Received: 08.11.2008 klo 02:27
Press control knob to acknowledged the alarm.
Acknowledging alarms: Press OK. If the cause of the
alarm has not disappeared, the exclamation mark in
the right upper will blink.
If it is too cold or hot, press OK
Contrl mode: Automat
Temp. level
22
9
33
Kellonajan asettaminen
Date
Mon19.09.2011
pp.kk.vvvv
Give the day
Clock functions
H1 Special calender >
H2 Special calender >
Time 20:52
Date Mon 19.09.2011