- 35 -
Installation
Tools and aids
You will need some manual skill for the installation:
– Phillips screwdriver, size 2
– Drill with masonry drill bit
– Measuring tape/folding ruler
– Level
– Pencil
– Stable step ladder
– Activated carbon filters for air recirculation mode
– Exhaust air hose for exhaust air mode
– Wall plugs (6x)
– Mounting bolts (6x)
Important!
Some steps are much easier to complete if another person
helps with handing
Removing the protective film
The painted surfaces of your new cooker hood are covered with a film to protect them
from scratching during transport. Do not remove the protective film until the final mounting
of the cooker hood.
Danger of injury!
Please note that some internal areas of the device may have sharp edges.
Only for exhaust operation
Before you mount the hood, the wall penetration (core drilling, diameter depending on pipe diameter)
must be completed by a specialist.
When planning the wall penetration, examine the length of the exhaust tube. The exhaust tube must
reach the outer edge of the wall without any kinks.
Important!
If the exhaust tube runs through an outer wall, the air output point must have an out covering with self-
opening slats (not included). To do this, please consult the specialist who performs the wall
penetration.
Содержание 1028770-77627265
