Otto Bock Kimba, Инструкция по эксплуатации

Страница: 27 / 44

62
6.3.6 Hook-and-loop foot straps
1) Drill two bore holes,
Ø 6 mm
, in the midfoot area of the supporting surface.
2) Attach the hook-and-loop foot strap to the supporting surface using the supplied screws (see fig. 63).
3)
If necessary:
Hook-and-loop foot straps can also be added for the forefoot area.
63
6.4 Standard arm supports
For mounting with the help of tripod springs that can be pushed in, see the instructions for use (user).
6.5 Adjustable arm supports
INFORMATION
►
To adjust the height and depth of the arm support, please see the instructions for use (user).
They are mounted on the lateral slotted holes of the hip supports:
1) Lift the cover on the hip support.
2) Loosen and remove the screws in the slotted holes of the hip support (see fig. 64, item 1).
3) Guide the arm support holder down through the slit in the cover (see fig. 65, item 1).
4) Put the screws through the slotted holes in the arm support holder and hip support (see fig. 65, item 2). Pre-
adjust the arm support holder and tighten the screws (see fig. 65, item 3/2).
5) Mount the second arm support at the same height.
27 Kimba
Installing options/accessories