Otto Bock Kimba, Инструкция по эксплуатации

Страница: 22 / 44

46
1 Clips with rivets 3 Lower attachment straps with buckles that can
be removed
2 Shoulder harness with closure buckles that can
be released from the side
Installing the harness for the upper body
1) Rivet the four clips (see fig. 46, item 1) in the bore holes of the back support frame (see fig. 47).
2) Lay the harness for the upper body down on the seat bottom. The front has to face the seat bottom.
3) Thread the shoulder harness (see fig. 46, item 2) through the padding and the back support (see fig. 48,
item 1). Attach the straps in the upper clips at the rear (see fig. 49, item 1).
4) Thread the lower attachment straps (see fig. 46, item 3) between the lateral supports and back support to the
rear (see fig. 48, item 2). Attach the straps in the lower clips at the rear (see fig. 49, item 2).
5) If necessary, cut off protruding belt ends of the attachment straps and seal the loose ends by applying heat
(e.g. with a lighter).
47 48
22
Installing options/accessories
Kimba