Otto Bock Kimba, Инструкция по эксплуатации

Страница: 18 / 44

6.2.3 Harness for the upper body
6.2.3.1 Four-point belt
35
1 Clips with rivet 5 Plastic loop
2 Shoulder harness, left and right 6 Belt buckle
3 Strap pads 7 Belt buckle with release button
4 Lap belt
Mounting the four-point belt
1) Rivet the clips (see fig. 35, item 1) in the bore holes of the back support frame (see fig. 36).
2) Thread the shoulder harness (see fig. 35, item 2) through the back support pad and back support (see fig. 38;
see fig. 37).
3) Attach the shoulder harness in the clips (see fig. 37, item 1).
4) If necessary, cut off protruding belt ends of the shoulder harness and seal the loose ends by applying heat
(e.g. with a lighter).
5) Mount the lap belt (see fig. 35, item 4) (see page 13).
INFORMATION: Assembly of the lap belt component with strap guides is possible as an alternative.
To do so, see the next section under "b) Mounting lap belts".
→ If the buckle (see fig. 35, item 7) can be closed when it lies in the centre of the seat, the four-point belt has
been mounted properly.
18
Installing options/accessories
Kimba