Otto Bock Harmony P3, Техническая информация

Страница: 9 / 36

Required tools and materials
• Plaster bandages, plaster cast scissors, 99B25 nylon stockinette, 683G1=* latex casting bag, 755Z19=230
vacuum pump
Cut a four-layer plaster splint.
INFORMATION:
The plaster splint is part of the plaster
cast and remains in the cast.
Place the plaster splint on the residual limb and ensure
it is seated correctly. The clearance to the end of the
tibia enables correct anterior positioning of the distal
soft tissue.
Wet the plaster splint and place it on the residual limb.
Pull a nylon stockinette over the residual limb.
Pull the latex casting bag over the plaster cast and seal
proximally.
Connect the vacuum hose and position the distal con­
nection of the casting bag on the nylon stockinette.
Position the residual limb such that the flexion angle is
approx.
10°
.
Switch on the vacuum pump (vacuum: min. 500 mbar ).
Let the plaster cure.
Hold the plaster splint in place and remove the casting
bag and the nylon stockinette.
3.2.4 Moulding the volume
Objective
In the third phase of plaster casting the residual limb volume is formed by wrapping with 2 to 3 plaster bandages.
Ottobock | 9 Harmony System
Procedure