Otto Bock Genium X3 3B5-2 Genium X3 3B5-2 ST, Инструкция по эксплуатации, Страница: 101 / 112

101
Beep signal Vibration
signal Additional action per­
formed Event
1x short 1x short Weight taken off prosthetic
leg and leg kept still for 1
second Switching to basic mode
(mode 1) carried out.
2x short 2x short Weight taken off prosthetic
leg and leg kept still for 1
second Switching to MyMode 1 (mode 2)
carried out.
3x short 3x short Weight taken off prosthetic
leg and leg kept still for 1
second Switching to MyMode 2 (mode 3)
carried out.
16.2.2 Warnings/error signals
Error during use
Beep signal Vibration signal Event Required action
– 1x long at intervals of
approx. 5 seconds (if
mute mode (silent
mode) is activated,
this signal is not gen­
erated) Overheated hydrau­
lics Reduce activity.
– 3x long Battery charge level
under 25% Charge battery soon.
Remaining operating time
approx. 24 hours
– 5x long Battery charge level
under 10% Charge battery soon
Remaining operating time
approx. 6 hours
5x long 5x long repeated
every 60 seconds Error of moderate
severity (see
page 93)
e.g. a sensor is not
operational
Walking possible with
restrictions. Note the
change in flexion resist­
ance.
The product must be
inspected by an O&P
professional immediately.
10x long 10x long Charge level 5%
After the beep and
vibration signals, the
product switches to
empty battery mode
and then switches
off. Charge the battery.
30x long 1x long, 1x short
repeated every
3 seconds Severe error/indic­
ation of safety
mode activation
(see page 93)
e.g. one or more
sensors are not oper­
ational
Attempt to reset this error
by connecting/discon­
necting the battery char­
ger.
If the error persists, use
of the product is prohib­
ited. The product must be
inspected by an O&P
professional immediately.