Otto Bock 8S11 Series, Инструкция по эксплуатации

Страница: 7 / 40

Ottobock | 7
The sections "Area of application" and "Environmental conditions", as well as the safety informa­
tion, contain important information regarding the safe use of the product and point out how dam­
age to the product can be avoided.
The following points provide suggestions how problems that occur in daily use can be addressed:
•
Safe handling of the product
A prosthetic glove enables the use of the prosthetic hand in everyday life. Practical exercises
are required within a course of therapy to become familiar with the product, which makes it
possible to use the product safely in a wide range of situations.
• Prevention of soiling and damage
A range of activities (e.g. in the house and garden) can cause soiling or damage to the pros­
thetic glove due to unallowable environmental conditions. It is nevertheless possible to per­
form these activities by taking corresponding protective measures (e.g. putting on working or
safety gloves) and exhibiting due care and attention. Because it is not always possible to
avoid light soiling, regular and immediate cleaning is required to keep the prosthetic glove
clean. In order to reduce bleeding, strongly coloured clothing should be washed according to
the manufacturer’s recommendations before being worn for the first time. Using caution when
handling coloured pens, printers and copiers as well as printed matter (e. g. newspapers,
photocopies) is important in order to avoid pigment particles from permanently staining the
material.
4.2 Cleaning
NOTICE
Non-observance of cleaning instructions
Damage to product and permanent soiling due to use of improper cleaning agents
► Only clean the product according to the cleaning instructions provided in the instructions for
use.
Light soiling
> Materials required:
warm water, soap, cloth, lint-free cloth
1) Clean the product with warm water, soap and a cloth.
2) Rinse off soap residues with water.
3) Dry the product with a lint-free cloth and allow it to air dry fully.
Heavy soiling
>
Materials required:
640F12 Special Cleaner, 640F13 Pump Sprayer, clean, undyed cloth (e.g. cellulose, linen),
water, lint-free cloth
1)
NOTICE! Clean the product promptly to avoid heavy dirt from permanently contaminat­
ing the material.
Spray the special cleaner on to the soiled area of the product and leave to take effect for a
short time.
2) Wipe off the dirt from the product with a clean, undyed cloth using light pressure.
3) Rinse off residual cleaner and dirt with water.
4) Dry the product with a lint-free cloth and allow it to air dry fully.
5 Disposal
This product may not be disposed of with regular domestic waste in all jurisdictions. Disposal that
is not in accordance with the regulations of the country where the product is used may have a det­
rimental impact on health and the environment. Please observe the information provided by the
responsible authorities in the country of use regarding return, collection and disposal procedures.