Otto Bock 4X889-1, Инструкция по эксплуатации

Страница: 15 / 16

Cleaning up Minor Dirt
1) Clean the product with a damp, soft cloth.
2) Dry the product with a soft cloth.
3) Allow to air dry in order to remove residual moisture.
7 Maintenance
►
NOTICE! Repair work must be performed exclusively by manufac­
turer service.
►
Arrange regular maintenance intervals with the patient depending on the
level of use.
► The prosthetic components should be inspected after the first 30 days of
use.
►
Inspect the entire prosthesis for wear during normal consultations.
► Conduct annual safety inspections.
7.1 Replacing the knee pad
1) Remove the old knee pad from the product (see fig. 8).
2) Clean only the adhesive surface of adhesive residues using a degreasing
cleaner.
3) Fit the new knee pad and glue it using contact adhesive.
4) Allow the adhesive to harden.
8 Disposal
This product may not be disposed of with regular domestic waste in all juris­
dictions. Disposal that is not in accordance with the regulations of the coun­
try where the product is used may have a detrimental impact on health and
the environment. Please observe the information provided by the responsible
authorities in the country of use regarding return, collection and disposal
procedures.
9 Legal Information
9.1 Liability
The manufacturer will only assume liability if the product is used in accord­
ance with the descriptions and instructions provided in this document. The
manufacturer will not assume liability for damage caused by disregard of this
document, particularly due to improper use or unauthorised modification of
the product.
Ottobock | 15