otometrics Madsen Xeta Скачать руководство пользователя страница 55

Страница: 55 / 108

MADSEN Xeta Test Settings

MADSEN Xeta is supplied with factory default settings. These settings have been selected as those most likely to be used
in the specific test functions. The settings are either test-specific, or apply to the general functions of MADSEN Xeta.

The system saves a copy of the test settings as 'system test settings' the first time a stimulus is presented to a new patient.

They are also part of the settings saved when a user setting is stored.

The system test settings will be used at power up or, if no user setting is activated, when at new patient is chosen.

If a user setting is chosen the test settings associated with that user is used when a new patient is chosen.

When you switch to a new test, the settings used in the test you are leaving will be saved and reused when you return to
that test.

The default settings can be loaded from

Device settings

►

Test setting types

You can change the settings of MADSEN Xetain three ways:
•

Front panel controls

►

•

Test-specific settings

►

•

General settings

►

All changes made to the test specific and general settings are permanent and will be used the next time you switch on
MADSEN Xeta.

6.1

Test-specific settings

When you select a specific test, you can change a number of settings relating specifically to this test.

1. Select the specific test, for example

, and press

Setup

to change settings.

2. Use the

Left level

knob to scroll between test settings.

3. Use the

Right level

knob to scroll between setting values.

4. Use the

Frequency

knob to scroll between frequency settings.

5. Press

Setup

to leave the

Setup

function.

6. The settings are saved and will be used when next you use this test.

6.1.1

Auto Threshold test settings

This Automatic Threshold test adheres to the modified (ascending) Hughson & Westlake method.

•

To speed up the test progress, see the setting

AT Procedure

►

•

To change settings, press

Setup

•

To return to the Auto Threshold test, see

Automatic Air Conduction testing

►

Default starting fre-
quency

1000 Hz.

You cannot change this value.

If the test cannot determine a threshold at this starting frequency, the entire test is
aborted. Reinstruct the patient and try again.

AT Frequencies

•

Use the

Frequency

knob to scroll between frequencies.

•

Use the

Right level

knob to set to

Off

. 1000 Hz is always

and cannot

be changed.

Otometrics - MADSEN Xeta

Содержание Madsen Xeta













































































































Результаты поиска

Содержание Madsen Xeta

Отзывы:

Похожие инструкции для Madsen Xeta

Бренды по названию

Популярные бренды

otometrics Madsen Xeta, Справочное руководство

Результаты поиска

Содержание Madsen Xeta

Отзывы:

Похожие инструкции для Madsen Xeta

Бренды по названию

Популярные бренды