oticon Amigo T20, Инструкция по эксплуатации

Страница: 9 / 23

16 17
Choosing and changing channels
To change the transmitting channel on the Amigo transmitter, press and hold either the
▲
button or the
▼
button for two seconds to select one of the predefi ned lists of
channels.
When the channel number begins to blink, press
▲
or
▼
to change channel. Press the SYNC button to
confi rm the choice of channel. The transmitter will
then be locked on to the new channel.
When the channel number is blinking you can return
to the original channel by pressing the C-button. This
will also return you to the main menu.
Whenever you need to change channel, simply repeat
the procedure.
Synchronising Amigo receivers
Connect the receiver to a hearing instrument, and turn it on. Check that the receiver
switch is set to the correct mode, i.e. FM only or FM+HA mode.
Off
FM-only FM+HA
Within a distance of approximately 50 cm, press the SYNC button. The LED on the
transmitter will then blink three times, and the SYNC logo will appear on the screen.
If the synchronisation is successful, the receiver will also blink three times.
Note: The switch on the receivers can be disabled, so use the T20/T21 or the WRP to
check the status. In its default setting, the receiver switch is enabled.