Otec ECO mini dry, Руководство по эксплуатации

Страница: 5 / 17

19
E
19
Introduction
Tank Width/ Height Weight Power Voltage Fre-
capacity Depth input quency
[l] [mm/inch] [mm/inch] [kg/lb] [W] [V] [Hz]
ECO-mini “dry” 3 220 / 9 340 / 13 3.7/8 50 230* 50 /60*
Safety Information
●
The Owner must make the Operating Instructions accessible to the
machine operator and must take the necessary time to ensure that he/she
has read the instructions and understands them fully.
●
The machine may only be operated with an earth leakage circuit breaker.
(ELCB, FI)
●
Please check to see if the machine is suitable for your voltage supply.
The manufacturer will not accept any liability for damages caused by
an incorrect voltage supply.
●
Use only the media recommended by OTEC. Acids and abrasive materials
can damage the machine and endanger your safety.
●
Always disconnect the electrical lead if the machine is not used or serviced.
Set up of the machine
The ECO-mini “dry” is a bench type machine and must stand on a flat sur-
face to avoid machine damages and incorrect work piece finishing. The air
supply to the ventilation flap on the lower side of the machine must always
be guaranteed. Insert the electrical plug into a socket. Ensure the voltage
supply is correct. The machine is now ready for use.
Technical Data
* Further versions on request