Otec ECO mini dry, Руководство по эксплуатации

Страница: 4 / 17

18 18
Introduction
Foreword
We would like to take this opportunity to
thank you for deciding to purchase our
ECO-mini.
OTEC conducts trial runs with the machine to
check its functions. As a result of these trial
runs, you may find that traces of the finishing
material that was used (walnut granulate and
polishing paste) remain in the machine.
To ensure that you operate the machine
properly and achieve good finishing results
on your work pieces with the machine, please
read the Operating Instructions carefully.
OTEC Präzisionsfinish GmbH does not
assume any liability for damages to the
machine or to work pieces if these are
attributed to non-observance of the following
Operating Instructions.