Oster Juice & Blend 2 Go FPSTJE3166, Руководство пользователя

Страница: 4 / 23

www.oster.com www.oster.com
4 5
HoW to:
Assembling the Juice extractor
Follow the assembling instructions listed below
before using your Juice Extractor:
• Before you start assembling your juice extractor,
make sure it is unplugged and it is placed on a dry
and level surface.
• Place filter basket on top of the motor base
(Figure 1).
• Place the stainless steel filter on top of the filter
basket pushing down and turning it until it fits
into the grooves of the motor shaft (Figure 2).
• Place juicer cover/lid on top of the filter basket
(Figure 3).
• Raise the safety locking arms and then lower them to
securely fit into the grooves in the lid and then firmly
press lower part of the locking arms into the unit
ensuring they lock the lid into the unit (Figure 4).
• Place the pulp container into position by tilting
it slightly (Figure 5) Important: Make sure Pulp
Container edge is underneath the lip of the
basket.
• Place a glass or jar under the spout located on the
right hand side of the juicer (Figure 6).
Figure 1
Figure 2
Figure 4
Figure 5
Figure 3
Figure 6
Powerful 400-watt
Motor
Safety Locking Arms
(both sides)
Food Chute
Stainless Steel Filter
Filter Basket
Large Pulp Collector
Container
ON/OFF Switch (I/O)
Food Pusher
Juice Extractor Lid/
Cover
Motor Base Housing
Safety Switch (both
sides)
Blender Assembly with
Blade
To-Go-Jar
Lid
learning about your
juice extractor & personal blender
a
b
e
g
h
i
j
c
d
f
l
m
n
k
i
a
b
c
d
e
f
g
h
j
k
l
m
n