www.oster.ca
www.oster.ca
4
5
Figure 1
Figure 2
Figure 3
Figure 5
Figure 6
Figure 4
Figure 7
HOW TO:
Assemble the Juice Extractor
Follow the assembly instructions listed below before
using your Juice Extractor:
• Before you start assembling your juice extractor, make
sure it is unplugged and it is placed on a dry and level
surface.
• Place filter basket on top of the motor base (Figure 1).
• Place the stainless steel filter on top of the filter basket
pushing down and turning it until it fits into the
grooves of the motor shaft (Figure 2).
• Attach rubber spout extension to juice spout
(Figure 3).
• Place juicer cover/lid on top of the filter basket
(Figure 4).
• Raise the safety locking arms and then lower them to
securely fit into the grooves in the lid and then firmly
press lower part of the locking arms into the unit
ensuring they lock the lid into the unit (Figure 5).
• Place the pulp container into position by tilting
it slightly (Figure 6) Important: Make sure Pulp
Container edge is underneath the lip of the basket.
• Place a glass or To-Go-Cup under the spout located on
the right hand side of the juicer
(Figure 7).
Powerful 400-watt
Motor
Safety Locking Arms
(both sides)
Food Chute
Stainless Steel Filter
Filter Basket
Large Pulp Collector
Container
ON/OFF Switch (I/O)
Food Pusher
Juice Extractor Lid/
Cover
Motor Base Housing
Safety Switch (both
sides)
Blender Assembly with
Blade
To-Go-Cup
Lid
Rubber Spout Extension
LEARNING ABOUT YOUR
JUICE EXTRACTOR & PERSONAL BLENDER
a
b
e
g
h
i
j
o
o
c
d
f
l
m
n
k
i
a
b
c
d
e
f
g
h
j
k
l
m
n
