6
5
Learning About the Oster Power Blender with Touchscreen
Technology
1. Filler Cap / 2 Ounce Measuring Cup: – Allows
you to add ingredients during use. Also allows
you to open to allow steam to escape when
blending hot foods.
2. Jar lid – Seals the blender jar.
3. Glass jar
Glass Jar Blade Assembly – With locking
feature to secure blade assembly to threaded
jar bottom. Seals the jar to the blade for leak-
proof operation.
4. Sealing Ring
5. Blade
6. Threaded Jar Bottom With Locking Lever –
Advanced design for simple assembly to jar.
7. Motor Base – Holds the jar securely. Contains
a powerful, variable speed motor.
8. Touchscreen Controls
a.
Power Button – Turns the product On and
Off.
b. Pre-Programmed Settings: Use for flawless
results at the touch of a button. Select the
desired setting and your Oster
®
Power
Blender cycle through the program,
delivering expert results at the touch of a
button. Unit will Stop after running through
the cycle. Select From: Smoothie, Salsa
c. Manual Controls: Select from Low-Med-
High
d. Pulse button – Press to pulse and release to
stop.
b
1
2
3
4
5
6
7
8
c
a
d
6 Cup glass Jar Assembly
1. Turn jar upside down so the small opening is at the top. Then
place sealing ring over jar opening. (Fig.1)
2. Place blade into jar. (Fig2)
3. Place threaded jar nut or threaded jar skirt over blade and jar
(NOTE: If there are slots on top of collar, line them up with
notches on jar.) Place the threaded jar nut or threaded jar skirt
on jar and turn it clockwise to tighten.
4. Place jar assembly onto base.
5. Line up tabs of jar with tabs on blender base. Make sure the tab
of the jar on the left side is in the back of the tab of the blender
base and the tab of the jar on the right side is in front of the tab
of the blender base. Make sure jar is seated into position. (Fig3)
CAUTION: If Locking Lever is damaged or missing, do not
operate blender, and contact Customer Service for a replacement.
6. Put the ingredients into the jar.
7. Secure the lid and filler cap.
8. Place the jar onto the base.
9. Plug the power cord into a standard household
120/127-volt, 60 hz. AC outlet. You are now ready to start.
ALWAYS PLACE HAND ON CONTAINER COVER
WHILE OPERATING BLENDER.
Using the Touchscreen Controls
1. Plug in the blender. Once plugged in, press on the “
” button for one second
to turn the blender on.
2. Select setting and blend ingredients to desired consistency.
NOTE: Control panel lists function as well as desired outcome.
3. Press Power Button to stop and turn off blender.
4. Press and hold PULSE
for ice crushing and chopping. Repeat as needed.
Locking
Sealing Ring
Threaded Jar
Bottom with
locking lever
Blade
Fig4
Locking Lever
Fig1
Fig2
Fig3
BLSTJJ-BNT_BLSTJJ-GT0_22EM1 (US).indd 5-6
BLSTJJ-BNT_BLSTJJ-GT0_22EM1 (US).indd 5-6
2022/1/26 下午3:18
2022/1/26 下午3:18
