FABRIC GUIDES
The following table is designed to help select the best setting and method for the fabric that
you intend to Iron. Verify the garment labels and follow the recommendations provided by the
manufacturer.
Position
Textile
Type Fabrics
Synthetics
Acrylic
Polypropylene
Polyurethane
Synthetics
Acetate
Triacetate
Synthetics
Nylon
Polyester
Modal
Rayon
Silk
Silk
Wool
Wool
Cotton
Cotton
Linen
Linen
POSSIBLE PROBLEMS AND SOLUTIONS
IRON DOES NOT HEAT
•
Iron should be plugged into an electrical outlet only.
•
Check to see that the fabric select dial is set to desired temperature.
•
Check the electrical outlet by plugging in a working lamp.
•
If the iron still is not heating, check for any visible damage. If not return this appliance only
to the nearest Authorized Service Center for examination, repair or adjustment.
IRON DOES NOT STEAM
•
Check to see that the Iron contains water. Add water if necessary.
•
Make sure the adjustable steam control/steam button is turned to the desired steam setting.
•
Gently tap the soleplate on the ironing board once or twice to clear steam valves of any
blockages.
IRON SPITS WATER OR LEAKS
•
Make sure Iron has been allowed to reach selected temperature for ironing.
•
If iron leaks when fabric select dial is turned to the Off position or while dry ironing, make
sure that adjustable steam control switch is turned to no steam position “ ” (Model 4420) /
“0” (Model 4415).
•
If steam ironing, turn the fabric select dial to a slightly higher setting and wait until the
indicator light goes out. Check that the higher setting is safe for the fabric being used.
•
Iron may be overfilled. Turn Iron to the Off position and unplug. Allow iron to cool and pour
water out of water tank. Plug iron into electrical outlet and reheat.
5
4415_4420-449_15EM1.indd 5
9/11/15 15:25
All manuals and user guides at all-guides.com
all-guides.com