BEFORE FIRST USE:
During first use of the iron, the appliance may appear to “smoke”. This will stop and does
not indicate a defect or hazard. Steam vents should be cleared before first use to remove any
residue remaining from the manufacturing process and to ensure that no stain is transferred
to fabric the first time the iron is used.
TO CLEAR STEAM VENTS
1. Turn the fabric select dial to the Off position and the adjustable steam control switch to
no steam position “ ” (Model 4420 only)/ to the “0” position (Model 4415 only).
2. Set the iron on its heel rest and fill with water to the “max” fill line. Overfilling the iron
may cause it to spill water during use. NOTE: Do not overfill the water tank and never fill
with anything but water.
3. Plug cord into an electrical outlet, and set the fabric select dial to its highest setting
“max”.
4. Let the iron preheat for 2 minutes while sitting on the heel rest.
5. Turn the adjustable steam control switch to the heavy steam setting “ ” (Model 4420
only)/ to the “3” position (Model 4415 only).
6. Press the Iron over an old cloth, and let it steam for a few minutes.
The Iron may spit or sputter during the first uses with tap water. As the Steam Chamber
becomes conditioned, this occurrence will stop.
FILLING WATER TANK
1. Disconnect the iron before filling the tank.
2. Turn the fabric select dial to the Off position and the adjustable steam control switch to
no steam position “ ” / “0”, so that the water enters directly into the tank and in order
to avoid spillage.
3. To fill the tank, place the iron in a vertical position and lift the water fill hole cover.
NOTE:
Do not overfill the water tank.
4. The water level can be seen through the water tank.
SPRAY FUNCTION
Be sure the iron is filled with water. If fabrics are too dry, or have stubborn creases or
wrinkles, the spray feature can be used to moisten the area. When the spray mist button is
pressed “ ”/“ ” (while the Iron is in the horizontal position), a fine spray of water will emit
from spray nozzle at front. It may be necessary to push the spray mist button a few times
before spray starts.
DRY IRONING
Sort items to be ironed according to the temperature settings on garment labels. Put the Iron in
a vertical position, set the adjustable steam control switch to no steam position “ ” / “0” and
fabric select dial in a level suitable for the garments. Begin ironing with garments that require
a lower setting (synthetic fabrics and silk) and gradually increase heat to Iron garments that
require higher temperatures. When changing from a high temperature setting to a lower
setting, allow approximately 5 minutes for the lower temperature to be reached.
OPERATING INSTRUCTIONS
HOW TO USE YOUR IRON
3
4415_4420-449_15EM1.indd 3
9/11/15 15:25
All manuals and user guides at all-guides.com
