Össur Innovator X, Инструкция по эксплуатации

Страница: 6 / 29

5
ENGLISH
USES
Controlled range of motion for post traumatic, post surgical
repair of the human elbow.
CAUTION
1. For single patient use only. If you experience increased pain,
swelling, sensation changes or any adverse reactions while using
this product, consult your medical professional immediately.
2. Proper rehabilitation and activity modification are also
essential parts of a safe treatment program.
3. Federal law prohibits this device to be sold or ordered by
anyone who is not a licensed health care practitioner.
PHOTO CAPTIONS
A. Extending struts for universal length sizing to fit both right
and left arms.
B. Non-slip padding on the proximal straps of the brace,
prevents migration.
C. Anti-Supination/Pronation handle as an optional feature.
D.Range of motion hinge
E. Malleable cu
ff s
FITTING INSTRUCTIONS
1. Assessing Length:
Locate the hinge pivot center over the lateral humeral epicondyle
(outer elbow).
2.
Adjusting Length:
The brace is preset to 13” length and extends fully to 17” length.
To adjust length, press the button on the distal cu
ff s and pull the
cu ff away from the elbow joint to the desired length.
The lower extension (ulnar side of arm) should extend up to the
styloid process (the bump on the medial side of the wrist).
The upper extension (humeral side of arm) should extend up to
the most comfortable position at the axilla or arm pit.
3.
Decreasing Length:
Press the button on the distal cu ff s and push the extending cu ff
to achieve the desired length.
4.
Bending the Cu ff s:
Bend the cu ff s to securely wrap around the circumference of the
arm. Start with the cu ff s proximal to the elbow.
5.
Trimming of Straps:
Trim the strap lengths as necessary.
Remove the hook piece, trim the strap and reapply the hook
piece.
6.
Securing the Straps:
After length and cu ff circumference are determined, secure
and fasten all straps, starting with the two straps closest to the
elbow
7.
Range of Motion Adjustment:
To adjust range of motion, press the flexion or extension button
and rotate until the desired degree of flexion or extension shows
through the corresponding window. Brace provides full range of
motion from 0 to 120 degrees.
8.
Enforced Compliance:
Loop and secure the enclosed lock ties through the hole in
the flexion and extension buttons to limit range of motion
adjustment.