Ossur PROPRIO FOOT, Техническое руководство

Страница: 16 / 24

16
MANUAL ANKLE OPERATION
• To enable step by step manual ankle operation, hold
down the upper button and press the lower button
six times.
»
The system confirms with a beep and vibration.
»
Use the upper and lower button to move the foot.
• If during use, ankle motion is repeatedly restricted for
any reason, the foot enters an error state and the
manual ankle operation is enabled automatically.
»
An alarm will sound and the LED blinks red and yellow,
green LED being steady on. Motor retries three times
before manual ankle operation is enabled.
SOUND ON/OFF
• To enable or disable auditory feedback hold down the
lower button and press the upper button seven
times.
»
The system confirms with a beep and vibration when
enabled.
»
There is no confirmation when sound is disabled.
MAINTENANCE
SERVICE
proprio foot ® is designed and manufactured to provide long and trouble free service intervals.
To ensure proper function, it is recommended that proprio foot ® is inspected every six months by a
qualified professional. Check for signs of unusual wear.
CLEANING
Follow these instructions:
• Remove proprio foot
®
from the cosmetic cover
• Wipe the foot with a soft cloth moistened with a small amount of isopropanol alcohol.
• Remove debris or dust without the use of compressed air.
note: do not dip the whole foot or pour solvent over the foot. The bearings and seals will be damaged.
do not use compressed air to clean the foot. Air will force pollutants into the bearings which may cause
malfunctions and early deterioration.
Press
6×
hold
1×
1×
Press
7×
hold
1×
1×