Potentiostat
User Manual
Ossila.com
21
Ossila Limited © 2021
II.
Black connector to CE.
III.
Blue connector to RE.
3.
Start the Ossila Cyclic Voltammetry software. The window shown in
4.
In the software enter the settings shown in
Figure 9.13.
Settings for measuring the Test Cell Chip.
5.
Click the ‘Measure’ button.
For the WE3 connector, if the Potentiostat is working and the measurement has been set up
correctly, you will see the response shown in
Figure 9.14.
Example voltammogram for WE3 on the Test Cell Chip.
WE1 and WE2 will give responses that are the same shape as WE3, but with maximum currents of
approximately 30 nA and 100 nA respectively. WE4 is a simple resistor and will produce a straight
line from 0 to 1
μ
A when performing a scan from 0 to 1 V.
