Solar Cell I-V Test System (Manual)
User Manual
Ossila.com
6
Ossila Limited © 2022
3.
Safety
3.1
Use of Equipment
The Ossila Solar Cell I-V Test System (Manual) is designed to be used as instructed. It is
intended for use under the following conditions:
•
Indoors in a laboratory environment (Pollution Degree 2)
•
Altitudes up to 2000m
•
Temperatures of 5°C to 40°C; maximum relative humidity of 80% up to 31°C.
The unit is supplied with a 24 VDC power adapter with a power cord for the country of purchase,
in accordance with European Commission regulations and British Standards. Use of any other
electrical power cables, adaptors, or transformers is not recommended
3.2
Hazard Icons
The following symbols can be found at points throughout the rest of the manual. Note and read
each warning before attempting any associated operations associated with it:
Table 3.1.
Hazard warning labels used in this manual.
Symbol
Associated Hazard
Electrical shock
3.3
General Hazards
Before installing or operating the Ossila Solar Cell I-V Test System (Manual), there are several
health and safety precautions which must be followed and executed to ensure safe installation
and operation.
3.4
Power Cord Safety
Emergency power disconnect options: use the power cord as a disconnecting method
and remove from wall. To facilitate disconnect, make sure the power outlet for this cord
is readily accessible to the operator.
