Solar Cell I-V Test System (Manual)
User Manual
Ossila.com
13
Ossila Limited © 2022
Figure 9.3.
Ossila Solar Cell I-V software: The Stabilised Current tab.
9.2
Quick Start Guide
1.
Start the Ossila Solar Cell I-V software. The window shown in
2.
Choose a measurement type as described in
Section 9.1
3.
Place your sample in the device holder.
4.
Place the device holder beneath your solar simulator.
5.
Set the appropriate settings in the software (explained in more detail in
I.
Set ‘Pixel Switching’ to ‘Manual’
.
6.
Open the shutter of your solar simulator.
7.
Click the ‘Measure’ button.
I.
You will be prompted to switch to the first pixel to measure.
II.
For each pixel, measurements are performed using the chosen measurement
settings.
III.
This process is repeated until all pixels have been measured.
8.
If automatic saving is turned on, the measurement data and settings will then be saved.
9.3
Shared Software Settings
The settings in these sections are shared between all measurement types.
