7
3.
Safety
3.1
Warning
3.2
Use of Equipment
The UV Ozone Cleaner is designed to be used as instructed. It is intended to be operated in a
laboratory environment under a fume cupboard/hood and is designed to be used in the
following environmental conditions:
•
Indoors in a laboratory environment (pollution degree 2)
•
Altitudes up to 2000 m
•
Temperatures of 5°C to 40°C; maximum relative humidity of 80% up to 31°C.
The cleaner is supplied with a power cord (and if necessary, an additional power transformer)
for the country of purchase, in accordance with European Commission regulations and British
Standards. Use of any other electrical power cables, adaptors, or transformers is not
recommended.
3.3
Hazard Icons
The symbols shown in
Table 3.1
can be found at points throughout the manual. Note each
warning before attempting any associated operations.
•
Operate within fume cupboard in a room with suitable air ventilation at all times
•
Only use the power cord (and transformer) supplied with the unit
•
Mains inlet rated for 230V ± 10%. For 110V mains supplies, use the transformer supplied
•
Do not cover the ventilation slots
•
If the lamp breaks, leave the room ventilating for at least 15 minutes and contact Ossila
•
The unit must be connected to a grounded power outlet
