OSS OSS-PCIE-4UV-5slot Скачать руководство пользователя страница 97 | Manualshive

Страница: 97 / 98

background image

One Stop Systems

4U Value 5slot G3 Expansion Unit

97

17 Shipping / transporting the unit

GPU cards should be removed from the slots when transporting or
shipping the unit as this can break the slot and damage the card.

IMPORTANT

PCIe cards should be removed (or not to be installed) prior to shipping to avoid or prevent possible damage, failure to
do so, will void the warranty of the unit..

18 APPENDIX A Compliance

FCC

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the service personnel will be required to correct the interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the service personnel’s authority to
operate the equipment.

NOTE

The assembler of a personal computer system may be required to test the system and/or make necessary modifications if a
system is found to cause harmful interferences or to be noncompliant with the appropriate standards for its intended use.

Industry Canada

This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numériqué de la classe A est conformé à la norme NMB-003 du

Canada

CE

The product(s) described in this manual complies with all applicable European Union (CE) directives. One Stop Systems will not retest or

recertify systems or components that have been reconfigured by customers

«
...
95
96
97
98
»

Содержание OSS-PCIE-4UV-5slot



































































































Отзывы:

Нет отзывов

Похожие инструкции для OSS-PCIE-4UV-5slot

inLab Speedcure 9494800

Бренд: Dentsply Sirona Страницы: 91

Бренд: H3C Страницы: 3

BLKDP45SG - MB 1333FSB DDR3 1333 Aud+Lan RAID SATA ATX

Бренд: Intel Страницы: 86

IP-Logic ZIG-IPPRO-RX

Бренд: Zigen Страницы: 4

Бренд: Omron Страницы: 29

Бренд: FiberHome Страницы: 44

Бренд: Renesas Страницы: 67

Бренд: SilverStone Страницы: 2

Бренд: Paradyne Страницы: 28

Бренд: DOD Страницы: 12

Бренд: ADLINK Technology Страницы: 69

Бренд: artisan Страницы: 36

Selenio SNP-GW-3GX32

Бренд: Imagine communications Страницы: 153

Dual Window Multi-Graphic Processor MGP 462

Бренд: Extron electronics Страницы: 2

Бренд: Huawei Страницы: 4

CR52-RPR/STM64-XFP

Бренд: Huawei Страницы: 2

Бренд: Huawei Страницы: 2

Бренд: Huawei Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды