OSS OSS-PCIE-4UV-5slot, Руководство пользователя

Страница: 26 / 98

One Stop Systems
4U Value 5slot G3 Expansion Unit 26
4.3 Reinstall Top Cover
CAUTION
Re-install top cover when done checking internal LEDs to allow proper airflow.
4.4 Front LEDs Status Indicator
There are two LED status indicators located on the front of the unit. These two LEDS should be ON as solid green upon powering UP the
expansion unit.
PWR LED FAN LED
Solid Green: Power good Solid Green: Operational
Amber / Orange: Faulty Red: Fan is faulty
4.5 Power Supply LED Indicator
Both LEDs should be ON as solid green, it indicates an OK status of the DC GOOD signal. The LED shall continue to glow under normal
operation of the power supply. If this LED is blinking or not lit or showing amber color, the power supply is not operating properly.

During protection mode ( main 12V rail), the LED should be amber.

During protection mode ( 5Vsb rail), the LED should be off.

When protection is cleared, the LED should go back to the original intended status.

When the unit is in standby with AC is present, the LED should be amber.

When the unit is in standby with no AC is present, the LED should be off.

When the unit is turned on properly, the LED is green.

During wakeup redundancy mode, the LED should be Green.

During wakeup redundancy sleep mode, the LED should be blinking Green in 1Hz