OSS ExpressBox 2200, Руководство пользователя

Страница: 19 / 79

One Stop Systems
ExpressBox 2200 | 2 Hardware Installation 19
2.6 Install PCIe Cards
It is highly recommended to install third party PCI-E cards / High Power PCIe cards after you have verified and tested that the OSS expansion
chassis is functional.
When installing third Party PCIe card, start with one card first just to see if there are any software and/or hardware issues or incompatibility
problems that may occur. This way you can troubleshoot the problem more easily and efficiently. If everything works well with one card and
there are no configuration issues, you can proceed with the installation of the remaining cards.
Remove slot covers and install PCIe cards.
Make sure that all cards are fully seated in their PCIe card slots. When correctly seated, there will be a firm resistance when you pull up gently
on the card. To keep the cards in place, secure them in the enclosure with their retaining screws. After securing the cards verify that they do
not touch each other.
Some card manufacturers recommend that you install their software driver prior to installing the card. If this is the case, be sure to install the
card driver before connecting EB2200 to the computer.
Always refer to or read “3
rd
party manufacturer installation guide” for further instructions