One Stop Systems
4U Pro 16 Slot
27
8.1.2
x8 Configuration: TWO cables
Note: Make sure the HIB616-x16 host card is manually set to x8 configuration, see the x8 switch setting section for more details
•
Plug-in the 1
st
cable to Port#0 (Top port) on both Target and Host cards
•
Plug-in the 2
nd
cable to Port#1 on both Target and Host cards.
On the host card side, you can move the two cables to the bottom ports.
•
1
st
Cable to PORT #2
•
2
nd
cable to PORT #3
Note: The two cables on the TARGET card must remain connected on PORT #0 and PORT #1. See diagrams below as an example.
Photo B1:
The two
cables are connected on the Target card PORTS # 0 and # 1. The other end of the cables are connected on the Host card
PORTS # 2 and # 3.
Photo B2:
The two
cables are connected on the Target card PORTS # 0 and # 1. The other end of the cables are connected on the Host card
PORTS # 0 and # 1.
