Osram AM255360031, Руководство по установке

Страница: 25 / 56

25
- SYMPHOLIGHT v5.0 or higher needed-
To access the web interface, open a common web browser on a connected
PC. Enter the SYMPL pro Node's (e:pix) / SYMPL essential Node’s IP
address into the address bar:
e.g. http://192.168.123.1.
Open the Test mode page by selecting “TestMode” on the left side of the
web interface of the SYMPL pro Node (e:pix) / SYMPL essential Node:
Click a button to choose a test pattern. Define the properties:
Property Description
Output DMX/RDM ports to run the test on.
Channel Count Total frame length. Editable in “TestMode e:pix” on
SYMPL pro Node e:pix only.
Block Size Block size in which to step through the frame length
in channel count.
Offset Start address of the first test loop (first channel = 1).
Value Luminance of the test output (0 - 255).
Step Time Delay between steps. Manual : Press the Test button
to move the block. Define the first channel at “Start
Address”.
Click “set” to run the test and to apply changes in the test settings.