Osprey Talon Decoder User Guide
19
<20180425>
Decoder Setup
All configuration for actual decoding is found under the tab marked “Stream (1)”. If your interface
doesn’t have a tab marked “Stream” simply click on the tab marked “+” and one will be created
automatically. Additional streams may be created by
clicking the “+” up to
a maximum of 3 streams.
Options
Autostart
allows the user to select one or more of the Streams to begin streaming when the power
switch is turned on. This allows for unattended recovery in the event power is lost. The default is
“
Disabled
”. Be sure to test stream configurations before enabling Autostart. Failure to do so can result
in failure to start.
Input Type
Talon Decoders accept RTP, UDP and Zixi Receiver streams. Select the protocol if the input you wish to
use. If the stream is Unicast, only the Port must be specified. If the stream is Multicast the dialog box
opens to allow the IP address of the stream.
Содержание Talon G1
Страница 1: ...Osprey Talon Decoder User Guide 1 20180425...