Osprey Talon G1, Руководство пользователя

Страница: 3 / 30

Osprey Talon Decoder User Guide
3
<20180425>
Getting Started
Before you can use your Osprey Talon encoder, you first need to set up and configure it. This chapter
provides you with the details and step-by-step instructions you need to make your installation as quick
and easy as possible.
Here are three starting requirements:
•
AC power source (100 - 240 V)
•
IP connection and/or Internet connection on a dynamic host configuration
protocol/domain name server (DHCP/DNS) network
•
A ‘ configuration host’ system
A configuration host is a networked PC computer running a compatible HTML browser. The browser on
the host will be used to access the configuration web page on the Talon encoder. There is also a small
application called ‘Osprey BOSS’ that is used to locate and identify Talon on the local network. BOSS
works with PC and Linux. Once Talon has been identified on the network any HTML browser can be used
to configure your encoder.
Use the web interface for setting options and controlling your Osprey Talon from another networked
computer.
This section addresses the high-level actions you must perform to physically connect and set up your
Osprey Talon video encoder.
Prerequisites
Before connecting the Osprey Talon encoder, ensure you comply with the following prerequisites:
•
All packaged items are undamaged and in working order.
•
Your environment meets all starting requirements.
•
Safety instructions, notices, and warnings in section 8.0 at the end of this document,
including:

FCC Notice

Environmental Notices

Warnings