Osprey Talon Decoder User Guide
22
<20180425>
LCD Touch Control (only on Talon G2 Decoders)
Configuration of the Talon G2 is done using the Web interface. Once stream outputs have been
configured, they may be started and stopped with the LCD Touch Control on the front of the encoder. To
configure the streams, use the IP address listed on the Touch Control to point your browser to the
configuration page
.
Encoder
Screen
Change
Main Screen
Main Screen icons will be red indicating Talon is
decoding. Status will update for each stream. If
“Error” is shown for any decoder, use the Web
Interface to view details on the error
.
Shows IP address and decoder status.
Select
to turn off the screen
Select
to go to streams screen
Select
to confirm changes to the stream
or
to return to the Main Screen without
changing
Select Stream by Number
to change state
or
to return to Main Screen
The stream icon will change to Orange
indicating a running state. Select arrow to
return to main screen
.
Содержание Talon G1
Страница 1: ...Osprey Talon Decoder User Guide 1 20180425...