
7
3.3.1 Delivery
The product should be transported carefully as
shown, with packaging.
!
CAUTION
Pipe stubs, valves etc. should not be used to lift
the product as this could cause malfunctions.
3.4 Requirements for installation location and
positioning
!
CAUTION
!
The product should be placed in a room with a drain, in accordance with the wetroom standard / latest TEK.
Overflow from safety valve to drain should be fitted anyway, see section 1.3. When the product is fitted in a
bench, an automatic water stop valve with sensor should be installed to prevent any water damage. Product
liability will only apply if this is followed.
!
The product should be placed in a dry and permanently frost-free position.
!
The product should be placed on a floor suitable for the total weight of the product when in operation.. See
type plate.
!
The product must have a clearance for servicing of 40 cm in front of the front.
!
The product should be easily accessible for servicing and maintenance.
Min. 40 cm
Min.
40 cm