4
1.3 Safety instructions for installers
!
WARNING
The overflow from the safety valve (supplied) must NOT be sealed or plugged.
!
Any overflow pipe from the safety valve MUST be > 18 mm inside, clear, undamaged and
frost-free with a fall to the drain.
!
The relevant regulations and standards, and this installation manual, must be followed.
1.2 Safety instructions for users
!
WARNING
The overflow from the safety valve must NOT be sealed or plugged.
The product must NOT be modified or changed from its original state.
Children must NOT play with the product or go near it without supervision.
!
Maintenance/settings should only be carried out by persons over 18 years of age, with sufficient understanding
!
CAUTION
The product must not be exposed to frost, over-pressure, over-voltage or chlorine treatment.
See warranty provisions.
Maintenance/settings should not be carried out by persons of diminished physical or mental ca-
pacity, unless they have been instructed in the correct use by someone responsible for their safety.
!
CAUTION
!
The product should be placed in a room with a drain, in accordance with the wetroom standard / latest TEK.
Overflow from safety valve to drain should be fitted anyway, see section 1.3. When the product is fitted in a
bench, an automatic water stop valve with sensor should be installed to prevent any water damage. Product
liability will only apply if this is followed.
!
The product should be properly aligned vertically and horizontally, on a floor suitable for the total weight of the
product when in operation. See type plate.
!
The product must have a clearance for servicing of 40 cm in front of the front.
