Oshkosh JLG 1043, Инструкция по эксплуатации и безопасности

Страница: 62 / 254

Section 3- Controls and Indicators
3 - 12 31211368
Right Dash Control Panel
1. Front Work Lights Switch (if equipped): On/Off switch.
2. Boom Work Lights Switch (if equipped):
On/Off switch.
3. Rear Work Lights Switch (if equipped): On/Off switch.
4. Beacon Light Switch (if equipped):
On/Off switch.
5. Hazard Lights Switch (if equipped): On/Off switch.
6. Power Outlet (if equipped):
12V receptacle.
7. Auxiliary Decompression Switch: Press to relieve pressure in auxiliary hydraulic
circuit. See page 5 - 18.
8. Master Light and Road Lights Switch (if equipped): Three positions: Off, Enable, On.
Switch must be in the enable or on position in order to operate work lights. Prior to
machine shut-down, ensure switch is in the off position.
9. Boom Ride Control Switch (if equipped): On/Off switch. While enabled and
travelling 3 mph (5 kph) or faster, the system acts to improve boom control over
rough terrain. Depress switch again to disable boom ride control.
10. USB Port (if equipped):
USB ports under protective tab.
11. Auxiliary Electric Switch (if equipped): On/Off switch.
O 0132 D
6
14
13
9
7
12
8
11
1 2 3 4 5
10
15
https://www.forkliftpdfmanuals.com/