Oshkosh JLG 1043, Инструкция по эксплуатации и безопасности

Страница: 45 / 254

Section 2- Pre-Operation and Inspection
2 - 17 31211368
1. Boom Sections and Lift, Tilt, Extend/Retract, Compensating Cylinders
-
• Check front, top, side and rear wear pads for presence of grease.
• Pivot pins secure; hydraulic hoses undamaged, not leaking.
2. Left Outrigger (if equipped)
- Pins secure; hydraulic hoses and cylinder undamaged,
not leaking.
3. Front Lights (if equipped)
- Clean and undamaged.
4. Front Axle - Steer cylinders undamaged, not leaking; pivot pins secure; hydraulic
hoses undamaged, not leaking.
5. Wheel/Tire Assembly - Properly inflated and secured; no loose or missing lug nuts.
Inspect for worn tread, cuts, tears or other discrepancies.
6. Boom Prop (if equipped) - See inspection note.
7. Wheel Chock (if equipped)
- See inspection note.
8. Mirrors - Clean and undamaged.
9. Cab and Electrical
-
• General appearance; no visible damage
• Frame level indicator(s) and window glass undamaged and clean
• Gauges, switches, joystick, foot controls and horn operational
• Check seat belt for damage, replace belt if frayed or cut webbing, damaged
buckles or loose mounting hardware
10. Wheel/Tire Assembly - Properly inflated and secured; no loose or missing lug nuts.
Inspect for worn tread, cuts, tears or other discrepancies.
11. Rear Axle Stabilizer Cylinder - Pins secure; hydraulic hoses undamaged, not leaking.
12. Rear Lights (if equipped)
- Clean and undamaged.
13. Reversing Camera (if equipped) - See inspection note.
14. Reversing System (if equipped)
- See inspection note.
15. Rear Lights (if equipped) - Clean and undamaged.
16. Rear Axle
- Steer cylinders undamaged, not leaking; pivot pins secure; hydraulic
hoses undamaged, not leaking.
17. LSI Sensor (if equipped)
- See inspection note.
18. Wheel/Tire Assembly - Properly inflated and secured; no loose or missing lug nuts.
Inspect for worn tread, cuts, tears or other discrepancies.
https://www.forkliftpdfmanuals.com/