Oshkosh JLG 1043, Инструкция по эксплуатации и безопасности

Страница: 55 / 254

Section 3- Controls and Indicators
3 - 5 31211368
4. Left Turn (if equipped):
Illuminates and flashes when left turn signal or hazard lights
are active.
5. LSI Passive Mode (if equipped): Illuminates when LSI passive mode is active. See
page 3 - 20.
6. Low Engine Oil Pressure:
Illuminates when oil pressure is low.
7. Low Fuel Level:
Illuminates when fuel level is low.
8. System Distress:
Illuminates when critical machine and engine faults exist.
9. Right Turn (if equipped):
Illuminates and flashes when right turn signal or hazard
lights are active.
10. Park Brake: Illuminates when park brake is applied. See page 3 - 15.
11. High Beam (if equipped): Illuminates when high beam lights are active.
12. High Exhaust System Temperature (HEST) (if equipped for ULS/110 or 130HP): May
illuminate during exhaust system cleaning. See page 4 - 6.
13. Rear Axle Stabilization (RAS):
Illuminates when rear axle stabilization is active. See
page 3 - 31.
14. Engine Preheat: Illuminates with ignition key in position 1. Indicator goes out when
start temperature is reached.
15. Selective Catalytic Reduction (SCR) (if equipped for ULS/110 or 130HP):
Illuminates
when stationary cleaning is required. Flashes during cleaning process. See page 4 - 6
for details.
16. Diesel Emission Fluid (DEF) (if equipped for ULS/110 or 130HP):
Illuminates when
DEF level is low, DEF quality is low or system is malfunctioning. System derate and/or
idle-lock may occur if conditions are not corrected.
• DEF indicator illuminates, DEF level gauge shows low fluid level and fault codes
are present when DEF fluid is low.
• DEF and Engine Fault Warning indicators illuminate and fault codes are present
when DEF quality is low or system is malfunctioning.
17. High Engine Coolant Temperature:
Illuminates when engine coolant temperature is
high.
18. Engine Fault Critical: Illuminates when critical engine fault exists.
19. Engine Fault Warning: Illuminates when engine is operating outside normal range.
20. High Hydraulic Oil Temperature: Illuminates when hydraulic oil temperature is high.
21. Engine Oil Pressure Gauge: Indicates engine oil pressure.
22. Engine Coolant Temperature Gauge: Indicates engine coolant temperature.
23. Engine Speed: Indicates engine speed in revolutions per minute (rpm).
24. Fuel Level Gauge: Indicates fuel level.
25. Diesel Emission Fluid (DEF) Level Gauge (if equipped for ULS/110 or 130HP):
Indicates fluid level.
https://www.forkliftpdfmanuals.com/