OSEE XCM-240, Руководство пользователя

Страница: 45 / 74

Functionality of the Main Menu
39
PBP
Main
Picture
Slave
Picture
Figure 5.1-15 PBP Mode
In PBP mode, it displays the WFM or Audio Meter only for the signal of
the current picture.
The current picture is labeled by a triangle, as shown in Figure 5.1-15,
at the bottom center of the picture. You can select the current picture by
the
WIN SELECT command assigned to a function key. The WFM
frame of the main picture displays at the left bottom corner of the screen,
and the WFM frame of the slave picture displays at the bottom right
corner of the screen. Meantime, if Audio Meter was shown up, it could
display at the top position of the screen, just at the top left corner or at
the top right corner, thus to avoid colliding with the WFM.
2.
Scope for the slave picture
The selection scope of the signal source for the slave picture will be
changing with the main picture's source, as shown in Table 5.1-10:
Table 5.1-9 The Relationship of the Signal Source for Slave Picture and
Main Picture
Signal Source for
Main Picture
\ Signal Source for
Slave Picture
SDI1 SDI2
LINE1
(CVBS) LINE2
(CVBS) LINE2
(Y/C) LINE2
(YPSPR)
HDMI
SDI1

     
SDI2       
LINE1(CVBS)       
LINE2(CVBS)  
   

LINE2(Y/C)  
   

LINE2(YPBPR)    
 

HDMI       
The input signal information of the main picture displays at the top left
corner of the screen, and the one of the slave picture displays at the top