OSEE XCM-240, Руководство пользователя

Страница: 53 / 74

Functionality of the Main Menu
47
Items
Default
Value
Domain Range Description
IMD ID 0 0~255
Set the ID number for
each monitor
IMD NAME XXXXXXXX
Set an IMD name for
each screen.
BAUD RATE 38400
2400/4800/9600/19200
/38400/57600/115200 Select a baud rate for
communication.
LED TALLY ON OFF/ON
Set whether to switch on
tally light.
OSD TALLY
MODE
RG

RG: Red/Green
 GR: Green only
 RGY:
Red/Green/Yellow
 OFF: No tally light
Select the OSD Tally
mode. Only the TALLY
SOURCE is STANDARD
or STANDARD + IV422,
the setting is available.
IMD TALLY
MODE
T1
T1/T2/T1T2/T2T1/T1-/
T2-/T1T2-/T2T1-
Select the IMD Tally
mode.
Use this setting when
using the Image Video
tally control, this setting
will determine the state
which is selected.
TALLY
SOURCE
STANDARD
STANDARD/IMAGE
IDEO/TSL Select the source for
LED tally source
 If IMD DISPLAY item is ON, the IMD CHARACTER in the black bar will
display on the bottom of the screen.

The length of IMD NAME and IMD CHARACTER is up to 16 characters.
The character range is from 0x00 to 0x7F of ASCII. Press ENTER to edit
the IMD characters, than use
UP
or
DOWN
to select characters, than press
ENTER
to go to next character, press
MENU
to exit editor. The KEY
INHIBIT is ON, KEY INHIBIT is enabled and press the POWER key, the
device would turn on or off. MENU, UP, DOWN, ENTER key can be
enable but only to set the KEY INHIBIT item, or there is a “KEY INHIBIT”
prompt displayed on the screen when using other keys.