OSEE IMP5212, Руководство пользователя

Страница: 26 / 46

IMP5212 Features
20
POWER
MODULES
INPUT
MODULES
OUTPUT
MODULES
CONTROL
MODULE
Figure 4.2-1 The Rear Connector of IMP5212
The video wall processor performs the power supply, input, output and control
functions through the corresponding modules, and you should make sure the
module has been inserted to the correct slot in the frame. Facing at the
direction of the front panel, the arrangement sequence of the modules from left
to right is power supply module, input module, output module and control
module. Each slot has an attribute, you can see the slots are different on bus
board.
 Power Module
It is used to supply AC power. There are two power input interfaces, and
the specification is 100-240V, 50/60Hz, 300W. They are labeled as PS1,
PS2 separately. The corresponding indicators are at the front panel. If the
light is green, the device is powered on, and if the light is off, the device is
powered off.

Only use the adapter and the power cord specified by the manufacture for
your safety
！