OSEE IMP5212, Руководство пользователя

Страница: 24 / 46

IMP5212 Features
18
the same time without delay.
For example: take up the example, all of the No.1~No.4 screens turn off at
9 second the time you clicked the stop button. The timing sequence logic
is as shown in Figure 4.1-8:
TIME
0 1 2 3 4 5 6 7 8 9
GPO1
GPO2
GPO3
GPO4
Figure 4.1-8 GPO Control Logic-Turn Off

Manual control mode
The manual control mode contains 4 control buttons: No.1 access to No.4
access, and they direct to the starting logic and the stopping logic
separately for each corresponding access.
For example: click No.1 access button, it will make contact of the first
group of relay, so the connected No.1 screen will be turned on; then click
this button again, it will break up the contact, and the No.1 screen will be
turned off. The other buttons are as the same, and you can check the
status of the corresponding screen by the device indicator at this interface.
 If you have started up a controlled device by clicking the Startup button of
automatic control mode, you can’t use the access button in manual control
mode, it is invalid.
3.
Language Selection
Language Selection is used to selecting the display language of the touch
screen: Chinese or English. The interface is shown in Figure 4.1-9, click
the language button to set the corresponding language.