background image

ROMANCE 28

 

 

 OWNER`S MANUAL 

 

 

      

 

 

 

 

WARNING:

 If the information in these 

instructions is not followed exactly, a fire or 
explosion may result causing property 
damage, personal injury or death.

 

FOR YOUR SAFETY:

 Do not store or use 

gasoline or other flammable vapors and 
liquids in the vicinity of this or any other 
appliance. 

Installation and service must be performed 
by a qualified installer, service agency or the 
gas supplier. 

WHAT TO DO IF YOU SMELL GAS: 

• 

Do not try to light any appliance. 

• 

Do not touch any electric switch; do not 
use any phone in your building. 

• 

Immediately call your gas supplier from 
a neighbor's phone. Follow the gas 
supplier’s instructions. 

• 

If you cannot reach your gas supplier, 
call the fire department. 

THE INSTALLATION MUST BE IN ACCORDANCE WITH LOCAL CODES OR, IN THE 

ABSENCE OF LOCAL CODES, WITH THE CURRENT 

NATIONAL FUEL GAS CODE

 

ANSI Z223.1

 (USA) OR THE CURRENT 

CAN/CGA B149

 

INSTALLATION CODES 

(CANADA). 

 

PLEASE KEEP THIS INSTRUCTIONS MANUAL 

FOR FUTURE REFERENCE 

Stove Builder International Inc., 

 1700 LÉON-HARMEL, QUÉBEC, (QUÉBEC), CANADA, G1N 4R9 

Tel : ( 418 ) 527-3060 

Fax : ( 418 ) 527-4311 

                                      

www.osburn-mfg.com

   

010517/45042A_feb 03 

f i r e - p a r t s . c o m

Содержание Romance 28

























Отзывы: