ROMANCE 28 STOVE
13
4. Remove and discard the
metallic plate (6) from the rear
heat shield using a flat screw
driver. Unscrew just a little bit
the two screws located each
side of the chimney connector.
Install the venting hood (5) by
sliding it into place. Screw
tightly in place.
5. Remove the four screws of the
valve cover (7) and slide
upwards to remove.
6. Unscrew the thermocouple (8)
from the bottom of the valve to
install interrupter bloc (9).
Reinstall the thermocouple (8)
into interrupter bloc (9).
Connect the two wires (10)
from the hood to the interrupter
bloc (9).
f i r e - p a r t s . c o m
