Oryx solutions SCA 1200ht, Руководство пользователя, Страница: 4 / 26

4
Introduction
This manual provides user instructions to properly operate and maintain the SCA 1200ht
Support Cleaning Apparatus (SCA).
How to use this guide
This User Guide is laid out in easy to follow sections that cover Setup, Operation,
Maintenance, and Troubleshooting. Read each section carefully so you will get the best
performance from your cleaning system.
Safety precautions
For your own protection and to ensure proper operation of the SCA please follow these
safety precautions. Failure to use the SCA for the intended function may result in
personal injury and will void the warranty.
•
Do not operate the SCA until you have read and understood this user manual.
•
Use the power supply voltage as noted in the Specifications section of this manual. Avoid
overloading the electrical outlet with multiple devices.
•
Use only the power cord supplied by the manufacturer. Replace a damaged power cord with
one approved by the manufacturer.
•
Ensure the system is well grounded electrically. As an added level of protection, local codes
and regulations may require the unit to be plugged into a Ground Fault Interrupt (GFI) or
similar protected outlet.
•
Always power off and unplug the SCA from the power outlet when it is being cleaned, moved
or serviced.
•
Do not use the SCA for any purpose other than removing soluble support material from 3D
printed parts.
•
Wear thermal gloves and safety glasses when working with or near the SCA. Always refer to
the cleaning solution safety Data Sheet (SDS) for additional Personal Protection Equipment
(PPE) requirements.
•
Do not allow aluminum or zinc to come into contact with caustic cleaning solutions.
•
Do not use any liquid other than water and Oryx approved cleaning solution products in the
SCA. An approved list of SCA compatible cleaning solution products is available on the Oryx
website:
www.oryxadditive.com/support .
•
DO NOT use hot water when filling the tank. The addition of cleaning solution to water is a
heat-releasing reaction and added to hot water will result in dangerous spattering.
•
Before disassembling or attempting repairs on the system, contact Technical Support as
directed in the Customer Support section of this manual.
The following classifications are used throughout this guide and/or marked on the SCA.
Hot Surface General Warning Electrical Danger