4. How to use
The detector’s PCB and battery holder are placed in a plastic enclosure with a removable base
(Figure 1).
A two-zone pyrodetector, a tamper switch, a multi-color LED indicator and
RESET
contacts to
initiate the process of binding with the Lun-R receiver are placed on the detector’s PCB.
Figure 1. Detector and its base
Depending on external actions, the detector transmits the following events to the Lun-R re-
ceiver:
●
If there are no moving people or large animals in the detection zone, then the
norm
event is generated;
●
If moving people or large animals are detected, then the
alarm
event is generated;
●
If the housing cover is opened, the tamper will be triggered and the
tamper alarm
event
will be generated;
●
If the voltage of the battery drops to 2.2V or lower – the event "
Battery low
" is generated.
In addition, the detector transmits periodic test signals to the receiver to confirm its operabil-
ity. When the test signals stop, the control panel generates the
detector communication lost
event.
The detector provides protection against the following types of interference (false alarms)
during movement of:
Small animals (150mm long and 30mm in diameter);
Small animals (dog weighing up to 10 kg) on the floor (more than 2m of the detector);
Medium-sized animals (for example, a dog weighing up to 20 kg) on the floor (more than
2m of the detector);
Longhair animals weighing up to 40 kg.
PIR-R
Version en_2
4
