background image

7. Maintenance

This product does not require any maintenance.

8. Operating conditions

The device shall be used at the temperature of –5°С to +40°С and relative humidity of 5% to

85%.

9. Storage

1. Product storage in terms of the climate impact shall be under conditions 2 according to

GOST 15150. Storage temperature shall be of -50°C...+40°C at the relative humidity of
5% up to 98%.

2. During handling operations, transportation and storage in warehouses, boxes with the

product shall not be exposed to sharp bows. Stacking and fixing of the boxes to the
transporter shall not include their movement.

3. Product shall be stored in the manufacturer's package.

10. Transportation

1. Product transportation shall be carried out in the manufacturer's package.
2. Product is allowed to be transported by all types of enclosed transporters, subject to

observing the shipping rules applicable for each type of transport.

3. Product transportation requirements in the terms of the impact of mechanical factors

shall be Group 2 according to GOST 12997.

4. Product   transportation   in   terms   of   the   climate   impact   shall   be   under   conditions   5

according to GOST 15150. Transportation temperature shall be of -50°C to +50°C at the
relative humidity of 5% up to 98%.

11. Disposal

Product disposal shall be carried out according to electronic household appliance disposal

rules established by the legislation of the State, where the product is operated.

АДМА.425713.005 РЭ

Rev. en_3

7

Содержание Lind-EM












Отзывы: