1. Purpose
“Lind-EM” Proximity Identification Card Reader (hereinafter referred to as “reader”) is designed
to control “Lun-11”, “Lun-11 mod.2”, “Lun-9T” and “Lun-7T” Control Panel and display their status.
The reader operates with proximity cards/keyfobs of “EM-Marine” standard on a frequency of
125 kHz at the distance of 3...8 cm.
Attention! Product is not equipped with built-in cameras and microphones, devices
and units for hidden video and audio recording.
2. Design
The reader is a compact device placed in a plastic housing, designed for installation on a flat
surface (eg wall). To connect to the alarm system it has three multi-colored insulated wires
(Figure 1).
Figure 1. “Lind-EM” reader
Wires assignment described in Table 1, connection diagrams to Control Panels see at
Figures 2, 3, 4.
Table 1. "Lind-EM" reader's wires assignement
Title
Wire colour
Assignment
GND
Black
Common terminal (–)
BUS
White
Interface to Control Panel:
TAN
“Lun-11”/”Lun-11mod.2”
BUS
“Lun-9T”/”Lun-9P”
TM
“Lun-7T”/”Lun-73T”
+12V
Red
Power-up input (+)
АДМА.425713.005 РЭ
Rev. en_3
3
